PING Facebook Pixel Tracking

G410 SFT

G410 SFT

G410 SFT Image Viewer

G410 SFT: Selected Image

Thumbnails

G410 SFT

In the SFT model, more heel-side weighting and a lighter swing weight help square the face to create right-to-left shot bend (RH golfers). The heads are slightly larger to drive up the MOI, and lofts are 1.5° higher to promote easier launch. A forged, maraging-steel face increases ball speed and distance, and a new lightweight eight-position sleeve offers a wider range of loft (±1.5°) and lie combinations.

PING G410 SFT Technology

  • CG Aligned with Force Line

    The low-back CG is slightly forward of G400 for faster ball speed with maximum stability and forgiveness. Impact occurs higher on the face, accelerating ball velocity with low spin for a long, penetrating ball flight.
  • Tungsten Weight, Forged Face

    A high-density tungsten weight at the extreme perimeter of the head increase stability and forgiveness. The face is made of C300 maraging steel (one of the strongest alloys in the world), and is machined extremely thin to produce more flexing for increasing ball speeds, shot height and distance.
  • 8-Lobe Trajectory Tuning

    Trajectory Tuning 2.0 utilises a new, patented lightweight and aerodynamic adjustable hosel with eight settings, offering loft (±1.5⁰) and lie adjustments, including up to 3⁰ flatter than standard, to optimise ball flight.
  • chart showing the loft and lie angles of the different G410 hosel positions

    Trajectory Tuning Chart

    Trajectory Tuning 2.0 in the G410 utilises a lightweight, aerodynamic hosel sleeve that provides eight positions for influencing ball flight through loft (±1.5°) and lie adjustments, including up to 3° flatter than standard.

G410 SFT
Specifications

Club Loft Adjustability Length Average Lie Angle Head Size Swingweight
3-Wood 16.0°degrees ±1.5°degrees 43" 56.5°degrees 188ccPing.Clubs.Specs.HeadSize.Units D0
5-Wood 19.0°degrees ±1.5°degrees 42 1/2" 1/2 57.0°degrees 177ccPing.Clubs.Specs.HeadSize.Units D0
7-Wood 22.0°degrees ±1.5°degrees 42" 57.5°degrees 167ccPing.Clubs.Specs.HeadSize.Units D0

Notes

  • These are design specifications that may vary due to manufacturing tolerances.
  • Lie angle is an average of the five adjustable loft positions indicated on the hosel.
  • Swingweights with Mitsubishi Tensei and Project X EvenFlow shafts are 1 point higher than standard.
  • Swingweights with Alta CB 65 Red SR & R flexes are 1 point lower than standard.
  • Swingweights with Tour 65 R and Tour 75 R flexes are 1 point lower than standard.
  • Available in left- and right-handed models.

G410 SFT
Shafts

Shaft Flex Weight Launch Angle
PING Alta CB 65 Red
PING Alta CB Red shaft
Soft Regular 61.0gPing.Clubs.Specs.Weight.Units High
Regular 63.0gPing.Clubs.Specs.Weight.Units Mid High
Stiff 67.0gPing.Clubs.Specs.Weight.Units Mid
X-Stiff 71.0gPing.Clubs.Specs.Weight.Units Mid
Project X EvenFlow Black 85
Project X EvenFlow shaft
6.0 78.0gPing.Clubs.Specs.Weight.Units Low
6.5 80.0gPing.Clubs.Specs.Weight.Units Low
Mitsubishi Tensei CK Orange 70
Mitsubishi Tensei CK Orange shaft
Regular 64.0gPing.Clubs.Specs.Weight.Units High
Stiff 67.0gPing.Clubs.Specs.Weight.Units Mid High
X-Stiff 70.0gPing.Clubs.Specs.Weight.Units Mid
PING Tour 65
PING Tour Shaft
Regular 53.0gPing.Clubs.Specs.Weight.Units Mid
Stiff 57.0gPing.Clubs.Specs.Weight.Units Low Mid
X-Stiff 62.0gPing.Clubs.Specs.Weight.Units Low
PING Tour 75
PING Tour Shaft
Regular 64.0gPing.Clubs.Specs.Weight.Units Mid
Stiff 70.0gPing.Clubs.Specs.Weight.Units Low Mid
X-Stiff 76.0gPing.Clubs.Specs.Weight.Units Low

G410 SFT
Grips

Grip Grip Size Description
Golf Pride 360 Tour Velvet
  • plus+1/16"Ping.Clubs.Grips.ColorCode.Size.Units
  • plus+1/32"Ping.Clubs.Grips.ColorCode.Size.Units
  • StdPing.Clubs.Grips.ColorCode.Size.Units
  • minus-1/64"Ping.Clubs.Grips.ColorCode.Size.Units
  • minus-1/32"Ping.Clubs.Grips.ColorCode.Size.Units
  • minus-1/16"Ping.Clubs.Grips.ColorCode.Size.Units

The Golf Pride Tour Velvet features a state-of-the-art rubber-blend compound with a non-slip surface pattern for maximum playability and confidence. The scientifically designed plus-sign texture pulls moisture away from surface to allow for consistent traction.

Golf Pride 360 Tour Velvet Cord
  • plus+1/32"Ping.Clubs.Grips.ColorCode.Size.Units
  • StdPing.Clubs.Grips.ColorCode.Size.Units

The Golf Pride Tour Velvet Cord features a state-of-the-art rubber-blend compound with a non-slip surface pattern and embedded cotton twill fibers for maximum playability and confidence in all weather conditions. The scientifically designed plus-sign texture pulls moisture away from surface to allow for consistent traction.

You Might Also Like

Find a PING Retailer or Fitter Near You

This site stores cookies on your computer to improve your browsing experience. By using this site, you agree to our Privacy Policy and Terms of Use.