PING Facebook Pixel Tracking

Anti-Left Hybrids

Bringing you insights from the PING Proving Grounds, where our talented team of engineers, researchers, fitting experts and data scientists design and develop the newest product and fitting technologies to help you play better. Using the most advanced tools available, we’ll explain and explore the science behind golf-equipment performance. We’ll separate fact from fiction with the goal of helping you make informed decisions when choosing the PING equipment best suited for maximizing your performance.

Hybrids: Freedom From The Left Miss

By Marty Jertson

If your game and your set makeup are anything like mine, you need the extra ball speed and spin that a hybrid is designed for, but you have some skeletons in the closet from bad left misses in the past. I have feared this just like you. But now I have the freedom from the hybrid left-miss…and with it comes immense confidence.

When my whole bag is set up to match my release pattern (my unique application of force and torque to the handle of the club), I'm much more confident and I play my best golf. This is the essence of custom fitting. The hybrid - maybe you can relate - has traditionally been a challenging club to get directionally dialed in. This is where the G410 hybrid 3D fitting comes into play. We now have some ‘levers’ (big movements) and ‘knobs’ (small refinements) to dial in the left-right bias.

The biggest custom-fitting lever for directional bias in hybrids is lie angle. With G410, we’re passing along this power directly to our customers and custom-fitting community. 

Our new Trajectory Tuning 2.0 sleeve unlocks an array of flat settings that, in most cases, eliminate that left miss or left tendency – especially for the astute player. 
G410 Hybrid Adjustability Chart
G410 Hybrid Adjustability Chart chart background and gridlines G410 logo symbol for standard hosel position symbol for small plus hosel position symbol for big plus hosel position symbol for small minus hosel position symbol for big minus hosel position symbol for flat standard hosel position symbol for flat minus hosel position symbol for flat plus hosel position +1.0° +1.5° -1.0° -1.5° -1.0° +1.0° Neutral Neutral Neutral Neutral Neutral Flat Flat Flat 2H 3H 4H 5H 6H 58.0 56.5 57.5 57.5 56.5 55.0 55.5 55.5 58.5 57.0 58.0 58.0 57.0 55.5 56.0 56.0 59.0 57.5 58.5 58.5 57.5 56.0 56.5 56.5 59.5 58.0 59.0 59.0 58.0 56.5 57.0 57.0 60.0 58.5 59.5 59.5 58.5 57.0 57.5 57.5 Setting Loft Adjustment Lie Zone Hybrids Avg. Lie 57.0 57.5 58.0 58.5 59.0

Let’s look at a fun example from the PGA Tour. Two-time major champion and PING Pro Angel Cabrera is playing his G410 17° (2) hybrid in the “Flat Minus” position. With this sleeve setting, the lie angle is 2.5° flatter (55.5°) than the standard “Dot” position (58.0°). We all know from watching Angel win his two majors that he loves to play a small fade or cut shot, and with his G410 hybrid he now has the freedom from the left miss. 

When our PGA Tour fitters were tuning in his hybrid fitting, a big premium was placed on the directional bias of the club.  Quite often, advanced fitters and our Tour players use the Trajectory Tuning adjustments for lie angle to achieve more centered contact. There are several tools you can use to check this yourself, including launch-monitor measurements, impact tape, face spray, or a simple Sharpie mark on the ball. 

If the sleeve and lie-angle settings don’t achieve the left-right bias for you perfectly, don’t worry, there are other options. Increasing the overall weight of the club, most easily accomplished by a heavier shaft, is another great custom fitting solution. Below, you can see that a switch from the Alta CB 70 Stiff to the Tour 85 Stiff increases the club’s total weight by 8 grams. This might not sound like a lot, but this added weight will help deliver a more open face-to-path (less left!).

Shaft Weight Influences Shot Patterns
Shaft Weight Influences Shot Patterns table showing how much a heavier shaft can affect swing weight and total weight table showing how much a heavier shaft can increase swingweight and totalweight Alta CB 70 Stiff D1 Tour 85 Stiff D2 Shaft Weight 76g 82g Total Club Weight 364g 372g
Increasing the total weight with a heavier shaft can deliver a more open face at impact

If the first two options still don’t quite get you 100% there, we can also utilize swing weight as a fine-tuning knob. 

By increasing the swing weight, or relative amount of mass in the head compared to overall distribution of weight of the club, we can also bias the face angle to be more open at impact. 

A simple adjustment from D1 to D2 swing weight often can be enough fine tuning to eliminate the left miss.  Be cautious with this approach, however, as going too heavy with just one club in your bag can lead to inconsistencies in the feel of the hybrid relative to your other clubs. The best approach to an entire set makeup is holistic, where you don’t have that one club in the bag that stands out as odd, requiring a drastically different swing. 

Fitting your equipment away from a miss is an under appreciated aspect of a great fitting. 

A skilled fitter will ask questions at the beginning of your fitting to help identify your pain points on the golf course.  Come prepared to your fitting ready to share your on-course frustrations. 

With the G410 hybrid, you get the fast ball speed powered by a maraging C300 face, plus great feel, forgiveness, and optimized spin ratios.  And now you can dial in your distance gapping and left-right bias that marries to your swing mechanics – a level of fitting service previously reserved for Tour players.  You can achieve freedom from the fear of left, and the fears of your past. This intersection of custom fitting and performance is innovation that helps you Play Your Best. #FittingMatters 

Marty Jertson
Vice President of Fitting & Performance

Marty has worked in golf R&D since 2004, including roles as Chief Engineer and Senior Designer, and is a named inventor on more than 125 patents. He earned a Bachelor of Science degree in Mechanical Engineering from the Colorado School of Mines. Marty is also a Class A PGA member and has played in six major championships. He made the cut at the 2019 PGA Championship at Bethpage Black, and competed in the 2020 U.S. Open.

Find a PING Retailer or Fitter Near You

This site stores cookies on your computer to improve your browsing experience. By using this site, you agree to our Privacy Policy and Terms of Use.