Glide 2.0 Stealth

Glide 2.0 Stealth Image Viewer

Glide 2.0 Stealth: Selected Image

Thumbnails

Glide 2.0 Stealth

The Glide 2.0 Stealth wedges’ 8620 carbon steel head and precision-milled grooves deliver a softer feel and higher-spinning shots for greater control. The tour-inspired Stealth finish, which yields less glare and makes the head appear smaller, is applied using a QPQ (Quench Polish Quench) process for added durability. Fits the game and the eye of players for whom performance and appearance go hand in hand.

PING Glide 2.0 Stealth Technology

  • Glide 2.0 Stealth 58 degree wedge groove illustration

    Milled Faces And Grooves

    These specialised grooves increase the spin rate for more control and precision on full and partial shots and offer exceptional spin consistency from both dry and wet conditions.
  • Glide 2.0 Stealth wedge sole comparison illustration

    Fitting By Sole Grind

    To ensure your wedges match your game, you can be fit for a sole grind based on your attack angle, divot depth, and typical turf conditions: SS Grind, WS Grind, TS Grind, or ES Grind.
  • Glide 2.0 Stealth face view

    Bottom 1/2 Groove

    A precision wheel-cut half groove near the lead edge on the 56⁰, 58⁰ and 60⁰ improves engagement with the ball (specifically low on the face) to significantly increase spin and control from all conditions.
  • Glide 2.0 Stealth SS sole view

    SS Grind

    An all-purpose mid-bounce sole with heel and trail edge relief to create versatility on touch shots around the green. Ideal for moderate attack angles and divots. Fits most golfers.
  • Glide 2.0 Stealth WS sole view

    WS Grind

    Full-sole design that provides turf security for players with a steep angle of attack. The reduced camber and added width prevent digging.
  • Glide 2.0 Stealth TS sole view

    TS Grind

    The TS grind facilitates shot making and precision. Heel relief allows shots to be executed with an open face without fear of the lead edge sitting too high.
  • Glide 2.0 Stealth ES sole view

    ES Grind

    Eye 2-inspired sole provides the ultimate in bunker performance from the classic dish profile along with the tapered hosel. A refined lead edge upgrades all-around performance.

Glide 2.0 Stealth 56/SS Wedge
Glide 2.0 Stealth
Specifications

Club Loft Length Lie Angle Offset Effective Bounce Swingweight
46/SS 46.0°degrees 35 1/2" 1/2 64.1°degrees 0.05"Ping.Clubs.Specs.Offset.Units 12.0°degrees D2
50/SS 50.0°degrees 35 1/2" 1/2 64.1°degrees 0.04"Ping.Clubs.Specs.Offset.Units 12.0°degrees D2
52/SS 52.0°degrees 35 1/2" 1/2 64.1°degrees 0.04"Ping.Clubs.Specs.Offset.Units 12.0°degrees D2
54/ES 54.0°degrees 35 1/4" 1/4 64.4°degrees 0.06"Ping.Clubs.Specs.Offset.Units 8.0°degrees D3
54/SS 54.0°degrees 35 1/4" 1/4 64.4°degrees 0.03"Ping.Clubs.Specs.Offset.Units 12.0°degrees D3
54/WS 54.0°degrees 35 1/4" 1/4 64.4°degrees 0.04"Ping.Clubs.Specs.Offset.Units 14.0°degrees D3
56/ES 56.0°degrees 35 1/4" 1/4 64.4°degrees 0.06"Ping.Clubs.Specs.Offset.Units 8.0°degrees D3
56/SS 56.0°degrees 35 1/4" 1/4 64.4°degrees 0.03"Ping.Clubs.Specs.Offset.Units 12.0°degrees D3
56/WS 56.0°degrees 35 1/4" 1/4 64.4°degrees 0.04"Ping.Clubs.Specs.Offset.Units 14.0°degrees D3
58/ES 58.0°degrees 35" 64.6°degrees 0.06"Ping.Clubs.Specs.Offset.Units 8.0°degrees D4
58/SS 58.0°degrees 35" 64.6°degrees 0.03"Ping.Clubs.Specs.Offset.Units 10.0°degrees D4
58/TS 58.0°degrees 35" 64.6°degrees 0.03"Ping.Clubs.Specs.Offset.Units 6.0°degrees D4
58/WS 58.0°degrees 35" 64.6°degrees 0.03"Ping.Clubs.Specs.Offset.Units 14.0°degrees D4
60/ES 60.0°degrees 35" 64.6°degrees 0.06"Ping.Clubs.Specs.Offset.Units 8.0°degrees D4
60/SS 60.0°degrees 35" 64.6°degrees 0.03"Ping.Clubs.Specs.Offset.Units 10.0°degrees D4
60/TS 60.0°degrees 35" 64.6°degrees 0.03"Ping.Clubs.Specs.Offset.Units 6.0°degrees D4
60/WS 60.0°degrees 35" 64.6°degrees 0.03"Ping.Clubs.Specs.Offset.Units 14.0°degrees D4

Notes

  • These are design specifications that may vary due to manufacturing tolerances.
  • Lie angle is based on Blue Colour Code at standard length.
  • Standard swingweights for graphite-shafted clubs are 1 to 2 points lighter than shown, depending on shaft flex.
  • Achievable swingweights depend on shaft and grip combinations.

Glide 2.0 Stealth 56/SS Wedge
Glide 2.0 Stealth
Shafts

Shaft Flex Weight Launch Angle
PING Alta CB
Alta CB Iron Shaft
Regular 72.0gPing.Clubs.Specs.Weight.Units Mid High
Soft Regular 66.0gPing.Clubs.Specs.Weight.Units High
Stiff 83.0gPing.Clubs.Specs.Weight.Units Mid
PING AWT 2.0 Wedge
PING AWT 2.0 Wedge Shaft
Wedge 118.0gPing.Clubs.Specs.Weight.Units Low Mid
True Temper Dynamic Gold
True Temper Dynamic Gold Shaft
R300 121.0gPing.Clubs.Specs.Weight.Units Low Mid
S300 124.0gPing.Clubs.Specs.Weight.Units Low Mid
X100 124.0gPing.Clubs.Specs.Weight.Units Low
True Temper Dynamic Gold 105
True Temper DG 105 shaft
R300 95.0gPing.Clubs.Specs.Weight.Units Mid High
S300 97.0gPing.Clubs.Specs.Weight.Units Mid High
True Temper Dynamic Gold 120
True Temper DG 120 shaft
S300 112.0gPing.Clubs.Specs.Weight.Units Mid
X100 114.0gPing.Clubs.Specs.Weight.Units Mid
FST KBS Tour
KBS Tour Shaft
Regular 104.0gPing.Clubs.Specs.Weight.Units Mid
X-Stiff 124.0gPing.Clubs.Specs.Weight.Units Low Mid
Stiff 114.0gPing.Clubs.Specs.Weight.Units Mid
Nippon N.S. Pro Modus 3 105
N.S. Pro Modus 3 105 Shaft
Regular 103.0gPing.Clubs.Specs.Weight.Units Mid High
X-Stiff 112.0gPing.Clubs.Specs.Weight.Units Mid High
Stiff 106.0gPing.Clubs.Specs.Weight.Units Mid High
Project X LZ
5.0 104.0gPing.Clubs.Specs.Weight.Units Mid
5.5 109.0gPing.Clubs.Specs.Weight.Units Mid
6.0 114.0gPing.Clubs.Specs.Weight.Units Mid
6.5 119.0gPing.Clubs.Specs.Weight.Units Mid
True Temper XP 95
True Temper XP95 Shaft
R300 93.0gPing.Clubs.Specs.Weight.Units High
S300 95.0gPing.Clubs.Specs.Weight.Units High

Glide 2.0 Stealth 56/SS Wedge
Glide 2.0 Stealth
Grips

Grip Grip Size Description
PING Dyla-Wedge
PING Dyla-Wedge grip
  • plus+1/32"Ping.Clubs.Grips.ColorCode.Size.Units
  • StdPing.Clubs.Grips.ColorCode.Size.Units
  • minus-1/64"Ping.Clubs.Grips.ColorCode.Size.Units

A 3/4-inch-longer grip encourages gripping down for trajectory control and added versatility on finesse shots. Grip-down markings at 1 3/8-inch intervals guide hand placement. A softer tapering profile improves feel when utilizing the lower grip-down markings.

Golf Pride Tour Velvet
  • plus+1/16"Ping.Clubs.Grips.ColorCode.Size.Units
  • plus+1/32"Ping.Clubs.Grips.ColorCode.Size.Units
  • StdPing.Clubs.Grips.ColorCode.Size.Units
  • minus-1/64"Ping.Clubs.Grips.ColorCode.Size.Units
  • minus-1/32"Ping.Clubs.Grips.ColorCode.Size.Units
  • minus-1/16"Ping.Clubs.Grips.ColorCode.Size.Units

The Golf Pride Tour Velvet features a state-of-the-art rubber-blend compound with a non-slip surface pattern for maximum playability and confidence. The scientifically designed plus-sign texture pulls moisture away from surface to allow for consistent traction.

Golf Pride Tour Velvet Cord
  • plus+1/32"Ping.Clubs.Grips.ColorCode.Size.Units
  • StdPing.Clubs.Grips.ColorCode.Size.Units

The Golf Pride Tour Velvet Cord features state-of-the-art rubber-blend compound with a non-slip surface pattern and embedded cotton twill fibers for maximum playability and confidence in all weather conditions. The scientifically designed plus sign texture pulls moisture away from surface to allow for consistent traction.

You Might Also Like

Find a PING Retailer or Fitter Near You