Glide 2.0

Glide 2.0 Image Viewer

Glide 2.0: Selected Image

Thumbnails

Glide 2.0

New, sharper grooves are closer together for increased friction, imparting more spin (up to 400 rpm in testing) for precise distance and trajectory control from full swings and finesse shots. The enhanced sole grinds and lead edges in the 431SS heads have been carefully crafted for exceptional surface interaction and versatility, gliding through the turf and sand to enable creative shot making.

PING Glide 2.0 Technology

  • Glide 2.0 Wedge Grooves Illustration

    Milled Faces And Grooves

    These specialised grooves increase the spin rate for more control and precision on full and partial shots and offer exceptional spin consistency from both dry and wet conditions.
  • Glide 2.0 Wedge Sole Grinds Illustrations

    Fitting By Sole Grind

    To ensure your wedges match your game, you can be fit for a sole grind based on your attack angle, divot depth, and typical turf conditions: SS Grind, WS Grind, TS Grind, or ES Grind.
  • Glide 2.0 SS Grind Illustration

    SS Grind

    An all-purpose mid-bounce sole with heel and trail edge relief to create versatility on touch shots around the green. Ideal for moderate attack angles and divots. Fits most golfers.
  • Glide 2.0 WS Grind Illustration

    WS Grind

    Full-sole design that provides turf security for players with a steep angle of attack. The reduced camber and added width prevent the sole from skipping into the ball.
  • Glide 2.0 TS Grind Illustration

    TS Grind

    The TS grind facilitates shot making and precision. Heel relief allows shots to be executed with an open face without fear of the lead edge sitting too high.
  • Glide 2.0 ES Grind Illustration

    ES Grind

    Eye 2-inspired sole provides the ultimate in bunker performance from the classic dish profile along with the tapered hosel. A refined lead edge upgrades all-around performance.
  • Glide 2.0 Wedge Grip

    Dyla-wedge Grip

    By gripping down on this ¾-inch-longer grip, you can be a more versatile shot maker and achieve trajectory control on every shot. Reduced taper further enhances shot making.

Glide 2.0
Specifications

Club Loft Length Lie Angle Offset Effective Bounce Swingweight
46/SS 46.0°degrees 35 1/2" 1/2 64.1°degrees 0.05"Ping.Clubs.Specs.Offset.Units 12.0°degrees D2
50/SS 50.0°degrees 35 1/2" 1/2 64.1°degrees 0.04"Ping.Clubs.Specs.Offset.Units 12.0°degrees D2
52/SS 52.0°degrees 35 1/2" 1/2 64.1°degrees 0.04"Ping.Clubs.Specs.Offset.Units 12.0°degrees D2
54/ES 54.0°degrees 35 1/4" 1/4 64.4°degrees 0.06"Ping.Clubs.Specs.Offset.Units 8.0°degrees D3
54/SS 54.0°degrees 35 1/4" 1/4 64.4°degrees 0.03"Ping.Clubs.Specs.Offset.Units 12.0°degrees D3
54/WS 54.0°degrees 35 1/4" 1/4 64.4°degrees 0.04"Ping.Clubs.Specs.Offset.Units 14.0°degrees D3
56/ES 56.0°degrees 35 1/4" 1/4 64.4°degrees 0.06"Ping.Clubs.Specs.Offset.Units 8.0°degrees D3
56/SS 56.0°degrees 35 1/4" 1/4 64.4°degrees 0.03"Ping.Clubs.Specs.Offset.Units 12.0°degrees D3
56/WS 56.0°degrees 35 1/4" 1/4 64.4°degrees 0.04"Ping.Clubs.Specs.Offset.Units 14.0°degrees D3
58/ES 58.0°degrees 35" 64.6°degrees 0.06"Ping.Clubs.Specs.Offset.Units 8.0°degrees D4
58/SS 58.0°degrees 35" 64.6°degrees 0.03"Ping.Clubs.Specs.Offset.Units 10.0°degrees D4
58/TS 58.0°degrees 35" 64.6°degrees 0.03"Ping.Clubs.Specs.Offset.Units 6.0°degrees D4
58/WS 58.0°degrees 35" 64.6°degrees 0.03"Ping.Clubs.Specs.Offset.Units 14.0°degrees D4
60/ES 60.0°degrees 35" 64.6°degrees 0.06"Ping.Clubs.Specs.Offset.Units 8.0°degrees D4
60/SS 60.0°degrees 35" 64.6°degrees 0.03"Ping.Clubs.Specs.Offset.Units 10.0°degrees D4
60/TS 60.0°degrees 35" 64.6°degrees 0.03"Ping.Clubs.Specs.Offset.Units 6.0°degrees D4
60/WS 60.0°degrees 35" 64.6°degrees 0.03"Ping.Clubs.Specs.Offset.Units 14.0°degrees D4

Notes

  • These are design specifications that may vary due to manufacturing tolerances.
  • Lie angle is based on Blue Colour Code at standard length.
  • Standard swingweights for graphite-shafted clubs are 1 to 2 points lighter than shown, depending on shaft flex.
  • Achievable swingweights depend on shaft and grip combinations.

Glide 2.0
Shafts

Shaft Flex Weight Launch Angle
PING AWT 2.0 Wedge
PING AWT 2.0 Wedge Shaft
Wedge 118.0gPing.Clubs.Specs.Weight.Units Low Mid
PING CFS Graphite
PING CFS Graphite Shaft
Regular 66.0gPing.Clubs.Specs.Weight.Units Mid High
Soft Regular 62.0gPing.Clubs.Specs.Weight.Units High
Stiff 78.0gPing.Clubs.Specs.Weight.Units Mid
True Temper Dynamic Gold
True Temper Dynamic Gold Shaft
R300 121.0gPing.Clubs.Specs.Weight.Units Low Mid
S300 124.0gPing.Clubs.Specs.Weight.Units Low Mid
X100 124.0gPing.Clubs.Specs.Weight.Units Low
True Temper Dynamic Gold 105
True Temper DG 105 shaft
R300 95.0gPing.Clubs.Specs.Weight.Units Mid High
S300 97.0gPing.Clubs.Specs.Weight.Units Mid High
True Temper Dynamic Gold 120
True Temper DG 120 shaft
S300 112.0gPing.Clubs.Specs.Weight.Units Mid
X100 114.0gPing.Clubs.Specs.Weight.Units Mid
FST KBS Tour
KBS Tour Shaft
Regular 104.0gPing.Clubs.Specs.Weight.Units Mid
X-Stiff 124.0gPing.Clubs.Specs.Weight.Units Low Mid
Stiff 114.0gPing.Clubs.Specs.Weight.Units Mid
Nippon N.S. Pro Modus 3 105
N.S. Pro Modus 3 105 Shaft
Regular 103.0gPing.Clubs.Specs.Weight.Units Mid High
X-Stiff 112.0gPing.Clubs.Specs.Weight.Units Mid High
Stiff 106.0gPing.Clubs.Specs.Weight.Units Mid High
True Temper XP 95
True Temper XP95 Shaft
R300 93.0gPing.Clubs.Specs.Weight.Units High
S300 95.0gPing.Clubs.Specs.Weight.Units High

Glide 2.0
Grips

Grip Grip Size Description
PING Dyla-Wedge
PING Dyla-Wedge grip
  • plus+1/32"Ping.Clubs.Grips.ColorCode.Size.Units
  • StdPing.Clubs.Grips.ColorCode.Size.Units
  • minus-1/64"Ping.Clubs.Grips.ColorCode.Size.Units

A 3/4-inch-longer grip encourages gripping down for trajectory control and added versatility on finesse shots. Grip-down markings at 1 3/8-inch intervals guide hand placement. A softer tapering profile improves feel when utilizing the lower grip-down markings.

Golf Pride Tour Velvet
  • plus+1/16"Ping.Clubs.Grips.ColorCode.Size.Units
  • plus+1/32"Ping.Clubs.Grips.ColorCode.Size.Units
  • StdPing.Clubs.Grips.ColorCode.Size.Units
  • minus-1/64"Ping.Clubs.Grips.ColorCode.Size.Units
  • minus-1/32"Ping.Clubs.Grips.ColorCode.Size.Units
  • minus-1/16"Ping.Clubs.Grips.ColorCode.Size.Units

The Golf Pride Tour Velvet features a state-of-the-art rubber-blend compound with a non-slip surface pattern for maximum playability and confidence. The scientifically designed plus-sign texture pulls moisture away from surface to allow for consistent traction.

Golf Pride Tour Velvet Cord
  • plus+1/32"Ping.Clubs.Grips.ColorCode.Size.Units
  • StdPing.Clubs.Grips.ColorCode.Size.Units

The Golf Pride Tour Velvet Cord features state-of-the-art rubber-blend compound with a non-slip surface pattern and embedded cotton twill fibers for maximum playability and confidence in all weather conditions. The scientifically designed plus sign texture pulls moisture away from surface to allow for consistent traction.

You Might Also Like

Find a PING Retailer or Fitter Near You