G410 LST

G410 LST Image Viewer

G410 LST: Selected Image

Thumbnails

G410 LST

The new smaller head has a CG slightly lower and more forward than the standard head to launch the ball higher with less spin, resulting in longer shots that get airborne easily, a plus for faster swing speeds and high-spin golfers. A forged, maraging-steel face increases ball speed and distance, and a new lightweight eight-position sleeve offers a wider range of loft (±1.5°) and lie combinations.

PING G410 LST Technology

  • Smaller Profile

    A slightly smaller head, optimal CG location and shallower face help to launch shots higher with less spin, resulting in longer shots that get airborne easily.
  • CG Aligned with Force Line

    The low-back CG is slightly forward of G400 for faster ball speed with maximum stability and forgiveness. Impact occurs higher on the face, accelerating ball velocity with low spin for a long, penetrating ball flight.
  • Tungsten Weight, Forged Face

    A high-density tungsten weight at the extreme perimeter of the head increase stability and forgiveness. The face is made of C300 maraging steel (one of the strongest alloys in the world), and is machined extremely thin to produce more flexing for increasing ball speeds, shot height and distance.
  • 8-Lobe Trajectory Tuning

    Trajectory Tuning 2.0 utilizes a new, patented lightweight and aerodynamic adjustable hosel with eight settings, offering loft (±1.5⁰) and lie adjustments, including up to 3⁰ flatter than standard, to optimize ball flight.
  • chart showing the loft and lie angles of the different G410 hosel positions

    Trajectory Tuning Chart

G410 LST
Specifications

Club Loft Adjustability Length Average Lie Angle Head Size Swingweight
3-wood 14.5°degrees ±1.5°degrees 43" 56.5°degrees 159ccPing.Clubs.Specs.HeadSize.Units D2

Notes

  • These are design specifications that may vary due to manufacturing tolerances.
  • Lie angle is an average of the five adjustable loft positions indicated on the hosel.
  • Swingweights with Mitsubishi Tensei and Project X EvenFlow shafts are 1 point higher than standard
  • Swingweights with Alta CB 65 Red SR & R flexes are 1 point lower than standard
  • Swingweights with Tour 65 R and Tour 75 R flexes are 1 point lower than standard

G410 LST
Shafts

Maximizing your distance and accuracy on long shots from the fairway is accomplished by matching the correct shaft flex for your swing. The goal is to achieve the correct trajectory with the fairway wood, which maximizes distance with the longer woods and minimizes roll with the shorter woods.
 

Generally, the same shaft type and flex as your driver will produce the optimal trajectory in fairway woods, but it is not uncommon for players to have a different shaft brand, type and/or flex in their fairway woods since they are ground-impact clubs and may perform differently for some players.
 

We recommend that you get fit for the shaft that allows you to play your best golf. Whether that’s a softer, lighter shaft with a higher launch or a heavier, stiffer shaft with a lower trajectory, a PING Certified Club Fitter can help you find the shaft that brings consistency to your game.

Shaft Flex Weight Launch Angle
PING Alta CB 65 Red
Soft Regular 61.0gPing.Clubs.Specs.Weight.Units High
Regular 63.0gPing.Clubs.Specs.Weight.Units Mid High
Stiff 67.0gPing.Clubs.Specs.Weight.Units Mid
X-Stiff 71.0gPing.Clubs.Specs.Weight.Units Mid
Project X EvenFlow Black 85
6.0 73.0gPing.Clubs.Specs.Weight.Units Low
6.5 78.0gPing.Clubs.Specs.Weight.Units Low
Mitsubishi Tensei CK Orange 70
Regular 61.0gPing.Clubs.Specs.Weight.Units High
Stiff 63.0gPing.Clubs.Specs.Weight.Units Mid High
X-Stiff 65.0gPing.Clubs.Specs.Weight.Units Mid
PING Tour 65
PING Tour Shaft
Regular 53.0gPing.Clubs.Specs.Weight.Units Mid
X-Stiff 62.0gPing.Clubs.Specs.Weight.Units Low
Stiff 57.0gPing.Clubs.Specs.Weight.Units Low Mid
PING Tour 75
PING Tour Shaft
Regular 64.0gPing.Clubs.Specs.Weight.Units Mid
X-Stiff 76.0gPing.Clubs.Specs.Weight.Units Low
Stiff 70.0gPing.Clubs.Specs.Weight.Units Low Mid

G410 LST
Grips

PING offers a variety of grip sizes and styles to fit different hand sizes and texture preferences. Since grip size influences your wrist action, and therefore the direction of your shots, it is commonly used by fitters to affect ball flight.


PING color-coded grips are available in six different diameters, and can be further customized with grip tape according to your needs. Once the neutral grip color code has been determined based on hand measurements, golfers may consider smaller diameter grips to help control fades and slices, or larger diameter grips to help control draws and hooks.

Grip Grip Size Description
Golf Pride 360 Tour Velvet
  • plus+1/16"Ping.Clubs.Grips.ColorCode.Size.Units
  • plus+1/32"Ping.Clubs.Grips.ColorCode.Size.Units
  • StdPing.Clubs.Grips.ColorCode.Size.Units
  • minus-1/64"Ping.Clubs.Grips.ColorCode.Size.Units
  • minus-1/32"Ping.Clubs.Grips.ColorCode.Size.Units
  • minus-1/16"Ping.Clubs.Grips.ColorCode.Size.Units

The Golf Pride Tour Velvet features a state-of-the-art rubber-blend compound with a non-slip surface pattern for maximum playability and confidence. The scientifically designed plus-sign texture pulls moisture away from surface to allow for consistent traction.

Golf Pride 360 Tour Velvet Cord
  • plus+1/32"Ping.Clubs.Grips.ColorCode.Size.Units
  • StdPing.Clubs.Grips.ColorCode.Size.Units

The Golf Pride Tour Velvet Cord features a state-of-the-art rubber-blend compound with a non-slip surface pattern and embedded cotton twill fibers for maximum playability and confidence in all weather conditions. The scientifically designed plus-sign texture pulls moisture away from surface to allow for consistent traction.

You Might Also Like

Find a PING Retailer or Fitter Near You